Your cart is currently empty.
Continue ShoppingSalted Line A6xxx Gen 3 vs Gen 4 Housing: What Is the Difference
The Salted Line A6xxx Gen 4 keeps everything that worked in Gen 3 and improves the parts you touch and look at most. You get a larger LCD window, control buttons with 50% stiffer springs and better resistance to hydrodynamic shock in rough water. The 80mm bayonet mount is unchanged, so every port from your Gen 3 fits the new body.
Below is a plain breakdown of what changed, what stayed the same and who should upgrade.

What changed in the Salted Line A6xxx Gen 4
Larger LCD screen window
The most visible change is on the backplate. The LCD window on the Gen 4 is larger, so the camera screen is easier to see through the housing. That helps when you check your settings or review a shot between dives or waves.
Stiffer buttons with clearer feedback
The control buttons now use springs with a 50% increase in stiffness. Each press feels more defined, which gives you better tactile feedback and more precise control underwater. All buttons are still O-ring sealed.
Better resistance to hydrodynamic shock
Gen 4 adds enhanced resistance to hydrodynamic shock for use in harsh conditions. In plain words, the housing copes better with the hits it takes from waves and fast moving water. If you shoot surf or work in a strong shore break, this is the upgrade that matters most. The depth rating stays at 60 m / 195 ft.

What stays the same
The same 80mm bayonet mount
Gen 4 uses the exact same 80mm bayonet mount as Gen 3, Gen 2 and all earlier A6xxx models. Any flat or dome port with an 80mm bayonet from your old setup fits the new body. You do not need to buy new ports to upgrade. These are the 80mm ports made for Salted Line A6xxx and RX1xx housings. Standard Sea Frogs ports do not fit. The Gen 4 housing body also comes with a 4" Medium Flat Port, so you can start shooting straight away.
If your ports have been in use for a few years, this is a good moment to refresh their O-rings. A flat port has one 80mm bayonet O-ring. Our guide on how to maintain O-rings on Salted Line dome ports walks you through it step by step.
Camera compatibility
Like every previous version, the Gen 4 housing fits the Sony A6000, A6100, A6300, A6400 and A6500. It is not compatible with the Sony A6600 or A6700. For the A6700 we make a separate housing. Read more in our post about the Salted Line A6700 housing in orange.
Leak sensor and vacuum check port
Both generations have a built-in leak detection sensor. Both also have a vacuum check system port, so you can test the seal before every dive with the VPS-100 pre-dive vacuum leak detection system. If you already own a VPS-100 pump, it works with Gen 4 as well. The new Salted Line Vacuum Lock System will also work with Gen 4. It will be released in early December 2026.
Strobes and shutter grip
Both housings have dual fiber-optic ports for triggering external strobes. On Gen 4 these are Sea&Sea type ports and you only need a fiber-optic cable to connect a strobe. Both also support the detachable two-stage shutter grip, which is sold separately. Your shutter grip from Gen 3 fits Gen 4 too.
Should you upgrade from Gen 3 to Gen 4?
If you find it hard to read the camera screen through the old, smaller LCD window, or your Gen 3 body is worn, Gen 4 is an easy upgrade. You get the larger window, buttons with 50% stiffer springs and a fresh housing body. All your 80mm ports carry over, so you do not need to pay for new ones.
The regular price of the Salted Line A6xxx Gen 4 kit stayed the same as Gen 3 at $297.
Watch the Gen 4 overview
In this video we show the differences and updates in the Gen 4 model.
Shop the Salted Line A6xxx Gen 4 housing →
Have questions about upgrading, port compatibility or your setup? Email us at support@saltedline.com or message us on social media. We are always happy to help.
Bottom line
The Salted Line A6xxx Gen 4 is a careful update, not a redesign. You get a larger LCD window, 50% stiffer button springs and better shock resistance. Your 80mm ports, shutter grip and VPS-100 pump all carry over from Gen 3. For surf shooters and anyone with a worn Gen 3 body, it is an easy upgrade.
Frequently Asked Questions
Will my Gen 3 ports fit the Gen 4 housing?
Yes. Gen 4 uses the same 80mm bayonet mount as Gen 3 and earlier A6xxx housings. Your flat and dome ports fit without any adapter.
Can I use my old shutter grip and VPS-100 pump with Gen 4?
Yes. The shutter grip and the vacuum pump from your Gen 3 setup work with the Gen 4 housing. Gen 4 has a built-in vacuum check system port and a leak detection sensor.
Does the Gen 4 housing fit the Sony A6600 or A6700?
No. The Gen 4 A6xxx housing fits the Sony A6000, A6100, A6300, A6400 and A6500. For the A6700 we make a separate Salted Line housing.
How deep can I take the Gen 4 housing?
The Gen 4 housing is rated to 60 m / 195 ft. Run a vacuum check before every dive so you know the seal is good before you get in the water.
Is the shutter grip included with the Gen 4 housing?
No. The two-stage shutter grip is sold separately. The housing comes ready for it, so you can add it at any time.
Stay safe, stay dry and happy shooting!
The Salted Line Team
Follow us for more tips, gear reviews and epic underwater shots:
Instagram @saltedline & @saltedlineeurope
Facebook Salted Line & Salted Line Europe
YouTube Salted Line Waterproof Housings & Salted Line Europe